Alembic

	Tale 6 information Information on this page has been lifted from Tale 6 Do not assume any information on this page is valid for Tale 7 If you can confirm that everything on the page is valid for Tale 7, please edit this page, and remove {{T7}} from the top of the page. If you can confirm some of the information is valid for Tale 7, place the symbol next to that item with the {{7ok}} tag If there's only a small portion that isn't verified, please add the symbol next to the portion that is not verified. Once this page is fully updated with Tale 7 information, please remove this stub

English	Deutsch	français	magyar	Türkçe

Alembic

An Alembic, or still, is a building used to create distilled spirits from alcohol (beer and/or wine).

Source

This building becomes available after you have learned the Distillation tech.

Cost

• 6 Copper Sheeting
• 1 Thermometer
• 25 Gold Wire
• 2 Small Gears
• 15 Glass Jars

Built in a Compound. Uses 9x13 cells.

Use

An alembic works by heating alcoholic liquid (either wine or beer) in a pot to make Spirits. Because alcohol boils at a lower temperature than water, the pure alcohol is separated from the rest of the mixture. The alcohol vapor drifts up through a pipe, cools, condenses, and collects in the output sink as liquid.

Alembics run on charcoal. Up to 1000 can be stored in the alembic.

Adding Alcohol

You can Add Wine or Add Beer to the alembic at any time. This adds the alcohol in that beverage to whatever's already in the pot. You can do this while the alembic is running. You can also choose to let the alembic heat up to some desired level before you add any alcohol at all (this is in fact good advice if you are trying for some intermediate-level spirit like Grain).

Note: Use large amounts of beer/wine at a time. When using 1 beer I get about 17 spirits of fire quality or 25 spirits of water quality. When using 8 beers at a time I get about 46 spirits of fire quality per beer. Huge difference! - Solaris

Guides

Every bottle of wine, and every keg of beer, can be thought of as a distribution of spirits of varying weights. The challenge of distillation is to coax out a particular segment of that distribution, at the level and purity desired.

• [|Check out the Tale 3 guide for full information]
• How to Use an Alembic

Levels

Please note that these are the levels to aim for, not the ranges, many thanks to Gumby for the info.