The Wiki for Tale 4 is in read-only mode and is available for archival and reference purposes only. Please visit the current Tale 11 Wiki in the meantime.
If you have any issues with this Wiki, please post in #wiki-editing on Discord or contact Brad in-game.
User:Tribisha
From A Tale in the Desert
Jump to navigationJump to searchAnka's CC Oven Macro readjusted to run at 1680x1050 resolution for Tale 4, uses ACTool (I'm still testing this to get it to work at a more optimal speed but the main changes were to the Y-axis for all the detection stuff. Everything that has a comment with "Originally" next to it was changed by me.)
// Charcoal Oven // // Setup: This handles from 1 to 8 charcoal ovens at a time. Pin the windows // in 2 rows of 4 starting in top left corner. But them up together but // Don't overlap them at all. I suggest at least 300 // wood per oven and a normally hold about 150 water jugs. // All ovens are slightly different but I suggest that you put your // fastest burning oven first in line. You can tweak the settings // to your liking in the new GUI window. Your settings will be saved. // // If you see anything odd, /chat me. // // ENJOY! :) // Anka //
Constants
// User Definable variables Ovens = 1 // Number of Ovens you are running. 1-8 HeatMinX = 119 // Originally 129 HeatX = 157 // Threshold for Heat bar, increase or decrease as needed. HeatMaxX = 178 Oxy1X = 82 Oxy2X = 133 WoodX = 109 // Wood threshold, adds wood/round up to this point. WaterX = 76 // Alowable water level, not much play here.. dont lower more than 2 DangerX = 170 // Originally 162 //Threshold for Danger bar, increase or decrease as needed. RGBBlue = 220 //Threshold for detecting the color blue. RGBGreen = 250 //Threshold for detecting the color green. Some video cards // are having problems with this. If you are having problems, run // just 1 oven and try lowering this number by 10 at a time. It's // hard for me to see what is going on without using your pc :( // This method is used for RGBBlue and RGBGreen. CheckDelay = 2000 Guild = 1 // 1 for Guilded or public ovens, 0 for Personal ovens // End User variables AddX = 212 // 215-Personal 212-Guilded Add2X = 15 Add1Y = 65 Add2Y = 17 Add3Y = 233 HeatMin = 0 HeatMax = 0 DangerMax = 0 BeginX = 103 BeginY = 229 NewX = 0 New2X = 0 New3X = 0 New2Y = 0 NewY = 0 Heat = 0 Oxy = 0 Wood = 0 Water = 0 Danger = 0 Status = 0 HeatY = 135 // Originally 140 OxyY = 147 // Originally 152 WoodY = 159 // Originally 164 WaterY = 171 // Originally 176 DangerY = 183 // Originally 188 StatusX = 172 StatusY = 195 // Originally 200 WoodBX = 35 WoodBY = 229 // Originally 234 WaterBX = 85 Vent0 = 130 Vent1 = 155 Vent2 = 180 VentBX = 0 OldVent = 1 Num = 0 Jump = 5 JumpM = 0 Jumped = 0 Used = 0 WoodNum = 0 MDelay = 100 SDelay = 200 // original 200 S1Delay = 100 Count = 0 CountM = 0 MouseX = 0 MouseY = 0
End
Form ccOven, Settings
ed1=Combobox:Ovens:1, 2, 3, 4, 5, 6, 7, 8 ed2=CheckBox:Guilded?:True ed3=Editbox:Heat (75-188):162 ed10=Editbox:HeatMin (75-188):116 ed11=Editbox:HeatMax (75-188):184 ed4=Editbox:Low Oxy (75-188):82 ed5=Editbox:High Oxy (75-188):134 ed6=Editbox:Wood (75-188):109 ed7=Editbox:Water (75-188):77 ed8=Editbox:RGBGreen:240 ed9=Editbox:RGBBlue:220 ed12=Editbox:Check Bars Interval (miliseconds):4000
end
FormLoad ccOven, ccOven.frm
if ShowForm ccOven
SetConst Ovens = ccOven[ed1] If ccOven[ed2] = True SetConst Guild = 1 Else SetConst Guild = 0 End SetConst HeatX = ccOven[ed3] SetConst Oxy1X = ccOven[ed4] SetConst Oxy2X = ccOven[ed5] SetConst WoodX = ccOven[ed6] SetConst WaterX = ccOven[ed7] SetConst RGBGreen = ccOven[ed8] SetConst RGBBlue = ccOven[ed9] SetConst HeatMin = ccOven[ed10] SetConst HeatMax = ccOven[ed11] SetConst CheckDelay = ccOven[ed12]
else
Stop
end
FormSave ccOven, ccOven.frm
MousePos 100, 20 //Activates eGenesis window.. Don't run ACTool maximized. Delay $MDelay LeftClick Delay 2000
If $Guild = 1
Call Guild
End
SetConst NewX = $BeginX SetConst NewY = $BeginY SetConst Count = 1 Loop $Ovens
If $Count = $Jump SetConst NewX = $BeginX Compute NewY = $BeginY + $Add3Y End MousePos $NewX, $NewY Delay $MDelay Rightclick Delay $MDelay Compute NewX = $NewX + $AddX Compute Count = $Count + 1
End SetConst NewX = $BeginX //Dont remember why this is here :) Call Main
Procedure Main
SetConst CountM = 1
SetConst Status = 0
Compute JumpM = $Jump - 1
Loop $Ovens
If $CountM = $Jump
SetConst NewX = $StatusX
Compute NewY = $StatusY + $Add3Y
SetConst New2X = $WaterBX
Compute New2Y = $WoodBY + $Add3Y
End
While $Status = 0
Call CheckBars
If $Status = 1
Call Snuff
//code to advance to next hearth
Compute Used = $Used + 1
If $Used = $JumpM
Compute HeatMinX = $HeatMinX - (($Used - 1) * $AddX)
Compute HeatX = $HeatX - (($Used - 1) * $AddX)
Compute HeatMaxX = $HeatMaxX - (($Used - 1) * $AddX)
Compute HeatY = $HeatY + $Add3Y
Compute Oxy1X = $Oxy1X - (($Used - 1) * $AddX)
Compute Oxy2X = $Oxy2X - (($Used - 1) * $AddX)
Compute OxyY = $OxyY + $Add3Y
Compute WoodX = $WoodX - (($Used - 1) * $AddX)
Compute WoodY = $WoodY + $Add3Y
Compute WaterX = $WaterX - (($Used - 1) * $AddX)
Compute WaterY = $WaterY + $Add3Y
//Compute DangerX = $DangerX - (($Used - 1) * $AddX)
Compute DangerY = $DangerY + $Add3Y
Compute StatusX = $StatusX - (($Used - 1) * $AddX)
Compute StatusY = $StatusY + $Add3Y
//Compute WaterBX = $WaterBX - (($Used -1) * $AddX)
//Compute WoodBX = $WoodBX - (($Used - 1 ) * $AddX)
//Compute WoodBY = $WoodBY + $Add3Y
SetConst Jumped = 1
Continue
Else
Compute HeatMinX = $HeatMinX + $AddX
Compute HeatX = $HeatX + $AddX
Compute HeatMaxX = $HeatMaxX + $AddX
Compute Oxy1X = $Oxy1X + $AddX
Compute Oxy2X = $Oxy2X + $AddX
Compute WoodX = $WoodX + $AddX
Compute WaterX = $WaterX + $AddX
//Compute DangerX = $DangerX + $AddX
Compute StatusX = $StatusX + $AddX
//Compute WaterBX = $WaterBX + $AddX
//Compute WoodBX = $WoodBX + $AddX
End
Continue
End
Case
When $HeatMin = 1
Call Wood
Set WoodNum = 1
Else
If $Heat = 0 and $Danger = 0
If $WoodNum = 0 and $Wood = 0
Call Wood
Set WoodNum = 1
else
Set WoodNum = 0
End
Else
If $Heat = 1 or $Danger = 1
If $Water = 0 or $HeatMax = 1 or $DangerMax = 1
Call Water
End
End
End
End
If {loopno} > 3
Case
When $Oxy = 0
// Open vent full
If $OldVent <> $Oxy
SetConst VentBX = $Vent2
Call Vent
SetConst OldVent = 0
Delay 100
End
When $Oxy = 1
// Oxy set normal
If $OldVent <> $Oxy
SetConst VentBX = $Vent1
Call Vent
SetConst OldVent = 1
Delay 100
End
When $Oxy = 2
// Close vent
If $OldVent <> $Oxy
SetConst VentBX = $Vent0
Call Vent
SetConst OldVent = 2
Delay 100
End
End
End
Delay $CheckDelay
End
Compute CountM = $CountM + 1
SetConst Status = 0
End
End
Procedure CheckBars
MousePos $HeatMinX, $HeatY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} < $RGBBlue
SetConst HeatMin = 1
else
Set HeatMin = 0
End
MousePos $HeatX, $HeatY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst Heat = 1
Else
SetConst Heat = 0
End
MousePos $HeatMaxX, $HeatY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst HeatMax = 1
Else
SetConst HeatMax = 0
End
MousePos $Oxy1X, $OxyY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst Oxy = 1
Else
SetConst Oxy = 0
End
MousePos $Oxy2X, $OxyY
Delay $SDelay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst Oxy = 2
End
MousePos $WoodX, $WoodY
Delay $S1Delay
LoadRGB {mousex}, {mousey}
if {RGBBlue} > $RGBBlue
SetConst Wood = 1
Else
SetConst Wood = 0
End
MousePos $WaterX, $WaterY
Delay $S1Delay
LoadRGB {mousex}, {mousey}
if {RGBBlue} > $RGBBlue
SetConst Water = 1
Else
SetConst Water = 0
End
MousePos $HeatX, $DangerY
Delay $S1Delay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst Danger = 1
Else
SetConst Danger = 0
End
MousePos $HeatMaxX, $DangerY
Delay $S1Delay
LoadRGB {MouseX}, {MouseY}
if {RGBBlue} > $RGBBlue
SetConst DangerMax = 1
Else
SetConst DangerMax = 0
End
MousePos $StatusX, $StatusY
LoadRGB {MouseX}, {MouseY}
if {RGBGreen} > $RGBGreen
//if {RGBRed} = 6 and {RGBGreen} = 254 and {RGBBlue} = 5
SetConst Status = 1
Else
SetConst Status = 0
End
End
Procedure Water
SetConst NewX = $WaterBX
SetConst NewY = $WoodBY
Loop $Ovens
IF {loopno} = $Jump
SetConst NewX = $WaterBX
Compute NewY = $WoodBY + $Add3Y
End
If {loopno} > $Used
MousePos $NewX, $NewY
Delay $SDelay
Rightclick
Delay $SDelay
End
Compute NewX = $NewX + $AddX
End
SetConst NewX = $WaterBX
End
Procedure Vent
SetConst NewX = $VentBX
SetConst NewY = $WoodBY
Loop $Ovens
IF {loopno} = $Jump
SetConst NewX = $VentBX
Compute NewY = $WoodBY + $Add3Y
End
If {loopno} > $Used
MousePos $NewX, $NewY
Delay $SDelay
Rightclick
Delay $SDelay
End
Compute NewX = $NewX + $AddX
End
SetConst NewX = $VentBX
End
Procedure Snuff
SetConst New2X = $WaterBX
SetConst New3X = $Vent2
SetConst New2Y = $WoodBY
Compute Num = $Used + 1
Loop $Ovens
IF {loopno} = $Jump
SetConst New2X = $WaterBX
SetConst New3X = $Vent2
Compute New2Y = $WoodBY + $Add3Y
End
If {loopno} = $Num
MousePos $New2X, $New2Y
Loop 8
Rightclick
End
MousePos $New3X, $WoodBY
Delay 200
Rightclick
End
Compute New2X = $New2X + $AddX
Compute New3X = $New3X + $AddX
End
End
Procedure Wood
SetConst NewX = $WoodBX
SetConst NewY = $WoodBY
Loop $Ovens
IF {loopno} = $Jump
SetConst NewX = $WoodBX
Compute NewY = $WoodBY + $Add3Y
End
If {loopno} > $Used
MousePos $NewX, $NewY
Delay $SDelay
Rightclick
Delay $SDelay
End
Compute NewX = $NewX + $AddX
End
SetConst NewX = $WoodBX
End
Procedure Guild
//Compute BeginX = $BeginX - 7 Compute BeginY = $BeginY + 16 Compute AddX = $AddX - 3 Compute Add3Y = $Add3Y + 16 Compute Add1Y = $Add1Y - 16 Compute WoodBY = $WoodBY + 16 //Compute HeatX = $HeatX - 4 Compute HeatY = $HeatY + 16 //Compute Oxy1X = $Oxy1X //Compute Oxy2X = Compute OxyY = $OxyY + 16 //Compute WoodX = $WoodX - 1 Compute WoodY = $WoodY + 16 Compute WaterY = $WaterY + 16 //Compute DangerX = $DangerX - 4 Compute DangerY = $DangerY + 16 //Compute StatusX = $StatusX - 5 Compute StatusY = $StatusY + 16
End //Written with ACTool 5.3.0 by Anka Bell Asterisk
