Anvil

	Tale 6 information Information on this page has been lifted from Tale 6 Do not assume any information on this page is valid for Tale 7 If you can confirm that everything on the page is valid for Tale 7, please edit this page, and remove {{T7}} from the top of the page. If you can confirm some of the information is valid for Tale 7, place the symbol next to that item with the {{7ok}} tag If there's only a small portion that isn't verified, please add the symbol next to the portion that is not verified. Once this page is fully updated with Tale 7 information, please remove this stub

English	Deutsch	français	magyar	Türkçe

Size	7x3
Where	Compound

Overview

Used for creating various hammered metal products.

Source

This building becomes available to be built after the Advanced Blacksmithing technology is learned at a University of Art & Music. (But an anvil can be operated with only the Blacksmithing tech).

Cost

• 1 Anvil Bed
• 120 Firebricks
• 4 Water in Jugs (jugs are consumed)

Built in a Compound. Uses 7x13 cells.

Tip: Build your anvil facing east to west instead of north to south because it will be much easier to work materials on the anvil using cartographer's camera from the camera options menu. The front of the anvil needs to face south(rotate once clockwise). If it is facing the wrong direction, make sure you have salvage techniques and then tear it down and rebuild the anvil till you get it right.

The primary problem with the Anvil is you cannot tell which end is front end. If you rotate it be very carry to note the orientation.

Also, if you plan to use some of the Carpentry Blade macros, they require the anvil to be in a specific orientation or the macro will fail because the macro can't tell where the front of the anvil is and when it tries to automate the hammer moves and rotations needed the iron won't be in the correct location for the hits. Zhukuram 11:34, 30 September 2015 (EST)

Use

An anvil is used to create various metal tools by shaping a block of metal into a specific pattern. Using an anvil requires the Blacksmithing tech.

This uses various smithing tools, each with a different pattern in pushing metal:

• Ball Peen Hammer
• Round Hammer
• Shaping Mallet
• Wide Tungsten Chisel

The finished products are assigned a quality based on how close they are to the goal. The higher the quality, the more effective the tool, with 9999 being perfect. An anvil can produce the following:

• Shovel - 10 metal; 4 wood to complete; require 6000+ to be effective
• Carpentry Blade - 1 metal; requires quality 3000+ to be used
• Hatchet - 20 metal
• Resin Wedge - 7 metal
• Sharp Edged Knife Blade - 10 metal
• Spring - 1 metal

from any of the following metals, with stronger metals allowing more hits before the piece becomes too fragile to work.

• Copper - 160 hit limit
• Iron - 180 hit limit
• Brass - 200 hit limit
• Bronze - 210 hit limit
• Steel - 220 hit limit
• Sun Steel - 240 hit limit
• Moon Steel - 250 hit limit
• Thoth's Metal - 260 hit limit
• Water Metal - 250 hit limit
• Metal Blue - 280 hit limit
• Octec's Alloy - 300 hit limit

For details on technique, please check out the Blacksmithing Guide.