User:Tut

Flax.lua

---

-- Edit these first 2 to adjust how much is planted in a pass -- May need to adjust walk_time in flax_common.inc if you move too slowly to keep up -- grids tested: 2x2, 3x3, 5x5, 6x6 (probably need 3+ dex and 600ms walk time) grid_w = 5; grid_h = 5;

loadfile("luaScripts/flax_common.inc")(); loadfile("luaScripts/screen_reader_common.inc")(); loadfile("luaScripts/ui_utils.inc")();

-- Just testing spiral algorithm, ignore this... function spiraltest() -- for spiral local dxi=1; local dt_max=grid_w; local dt=grid_w; local dx={1, 0, -1, 0}; local dy={0, -1, 0, 1}; local num_at_this_length = 3;

-- Plant and pin for y=1, grid_h do for x=1, grid_w do lsPrintln('doing ' .. x .. ',' .. y);

-- move to next position if not ((x == grid_w) and (y == grid_h)) then lsPrintln('walking dx=' .. dx[dxi] .. ' dy=' .. dy[dxi]); dt = dt - 1; if dt == 1 then dxi = dxi + 1; num_at_this_length = num_at_this_length - 1; if num_at_this_length == 0 then dt_max = dt_max - 1; num_at_this_length = 2; end if dxi == 5 then dxi = 1; end dt = dt_max; end else lsPrintln('skipping walking, on last leg'); end end end end

function doit() -- num_loops = promptNumber("How many " .. grid_w .. "x" .. grid_h .. " passes ?", 5); promptFlaxNumbers(1);

askForWindow("Script by Jimbly with tweaks from Cegaiel and KasumiGhia\n\nMake sure the plant flax window is pinned and you are in F8F8 cam zoomed in. You may need to F12 at low resolutions or hide your chat window (if it starts planting and fails to move downward, it probably clicked on your chat window). Will plant grid NE of current location. 'Plant all crops where you stand' must be ON. 'Right click pins/unpins a menu' must be ON. Enable Hotkeys on flax must be OFF.");

initGlobals();

local went_to_seeds = 0; -- Don't loop if we lost one, it'll mess us up! srReadScreen(); local xyPlantFlax = srFindImage(imgFlax1); if not xyPlantFlax then error 'Could not find plant window'; end xyPlantFlax[0] = xyPlantFlax[0] + 5; local xyCenter = getCenterPos(); local xyFlaxMenu = {}; xyFlaxMenu[0] = xyCenter[0] - 43*pixel_scale; xyFlaxMenu[1] = xyCenter[1] + 0;

for loop_count=1, num_loops do

fillWater(); movetoWater(0);

-- for spiral local dxi=1; local dt_max=grid_w; local dt=grid_w; local dx={1, 0, -1, 0}; local dy={0, -1, 0, 1}; local num_at_this_length = 3; local x_pos = 0; local y_pos = 0;

-- Plant and pin for y=1, grid_h do for x=1, grid_w do lsPrintln('doing ' .. x .. ',' .. y .. ' of ' .. grid_w .. ',' .. grid_h);

statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Planting " .. x .. ", " .. y);

-- Plant lsPrintln('planting ' .. xyPlantFlax[0] .. ',' .. xyPlantFlax[1]); setWaitSpot(xyFlaxMenu[0], xyFlaxMenu[1]); srClickMouseNoMove(xyPlantFlax[0], xyPlantFlax[1], 0); srSetMousePos(xyFlaxMenu[0], xyFlaxMenu[1]); waitForChange(); -- lsSleep(delay_time);

-- Bring up menu lsPrintln('menu ' .. xyFlaxMenu[0] .. ',' .. xyFlaxMenu[1]); setWaitSpot(xyFlaxMenu[0]+5, xyFlaxMenu[1]); srClickMouse(xyFlaxMenu[0], xyFlaxMenu[1], 0); waitForChange(); -- lsSleep(delay_time);

-- Check for window size checkWindowSize(xyFlaxMenu[0], xyFlaxMenu[1]);

-- Pin lsPrintln('pin ' .. (xyFlaxMenu[0]+5) .. ',' .. xyFlaxMenu[1]); srClickMouseNoMove(xyFlaxMenu[0]+5, xyFlaxMenu[1]+0, 1); -- lsSleep(delay_time);

-- Move window local pp = pinnedPos(x, y); lsPrintln('move ' .. (xyFlaxMenu[0]+5) .. ',' .. xyFlaxMenu[1] .. ' to ' .. pp[0] .. ',' .. pp[1]); drag(xyFlaxMenu[0] + 5, xyFlaxMenu[1], pp[0], pp[1], 0); -- lsSleep(delay_time);

-- move to next position if not ((x == grid_w) and (y == grid_h)) then lsPrintln('walking dx=' .. dx[dxi] .. ' dy=' .. dy[dxi]); x_pos = x_pos + dx[dxi]; y_pos = y_pos + dy[dxi]; srClickMouseNoMove(xyCenter[0] + walk_px_x*dx[dxi], xyCenter[1] + walk_px_y*dy[dxi], 0); lsSleep(walk_time); dt = dt - 1; if dt == 1 then dxi = dxi + 1; num_at_this_length = num_at_this_length - 1; if num_at_this_length == 0 then dt_max = dt_max - 1; num_at_this_length = 2; end if dxi == 5 then dxi = 1; end dt = dt_max; end else lsPrintln('skipping walking, on last leg'); end end checkBreak(); end

statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Refocusing windows...");

-- Bring windows to front refocusWindows();

local did_harvest=false; local water_step = 0; while not did_harvest do -- Monitor for Weed This/etc water_step = water_step + 1; for y=1, grid_h do for x=1, grid_w do statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Weeding/Harvest step " .. water_step); local pp = pinnedPos(x, y); local rp = refreshPosDown(x, y); local seeds_retry=3; while 1 do srClickMouseNoMove(rp[0], rp[1], 0); lsSleep(screen_refresh_time); srReadScreen(); local weed = srFindImageInRange(imgWeed, pp[0], pp[1] - 50, 120, 100); if weed then srClickMouseNoMove(weed[0] + 5, weed[1], 0); break; end local weed = srFindImageInRange(imgWeedAndWater, pp[0], pp[1] - 50, 120, 100); if weed then srClickMouseNoMove(weed[0] + 5, weed[1], 0); break; end local harvest = srFindImageInRange(imgHarvest, pp[0], pp[1] - 50, 110, 100); if harvest then srClickMouseNoMove(harvest[0] + 5, harvest[1], 0); srClickMouseNoMove(pp[0], pp[1], 1); -- unpin did_harvest = true; break; end local seeds = srFindImageInRange(imgSeeds, pp[0], pp[1] - 50, 120, 100); if seeds then seeds_retry = seeds_retry - 1; if (seeds_retry == 0) then if nil then -- Don't do this, it causes us to walk out of range of the rest! lsPrintln('Went to seed, grabbing the seeds and ignoring.'); srClickMouseNoMove(seeds[0] + 5, seeds[1], 0); end srSetMousePos(pp[0]+5, pp[1]+37); lsSleep(100); srClickMouseNoMove(pp[0]+5, pp[1]+37, 0); -- Utility lsSleep(100); srReadScreen(); local rip = srFindImage("FlaxRipOut.png"); if rip then srClickMouseNoMove(rip[0] + 5, rip[1] + 2, 0); -- Rip out else error 'Flax went to seed, but failed to find rip out option'; end lsSleep(100);

srClickMouseNoMove(pp[0]-3, pp[1], 1); -- unpin went_to_seeds = 1; did_harvest = true; break; end end checkBreak(); end end end

-- Bring windows to front if not did_harvest then statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Refocusing windows...");

refocusWindows(); end end

lsSleep(2500); -- Wait for last flax bed to disappear before accidentally clicking on it! statusScreen("(" .. loop_count .. "/" .. num_loops .. ") Walking...");

if went_to_seeds == 0 then -- Walk back for x=1, x_pos do srClickMouseNoMove(xyCenter[0] + walk_px_x*-1, xyCenter[1], 0); lsSleep(walk_time); end for x=1, -y_pos do srClickMouseNoMove(xyCenter[0], xyCenter[1] + walk_px_y, 0); lsSleep(walk_time); end end

if went_to_seeds and not loop_count == num_loops then error 'Some of the plants went to seeds, stopping loop' end

movetoWater(1); end

lsPlaySound("Complete.wav"); end

Flax_common.lua

---

-- Also using these for other planting automation

xyWindowSize = srGetWindowSize(); imgFlax1 = "FlaxGeneric.png"; imgHarvest = "HarvestThisFlax.png"; imgWeedAndWater = "WeedAndWater.png"; imgWeed = "WeedThisFlaxBed.png"; imgSeeds = "HarvestSeeds.png"; imgHarvestThese = "HarvestThese.png"; imgWeedThese = "WeedThese.png"; imgWater = "water.png"; imgMax = "maxButton.png";

delay_time = 100; screen_refresh_time = 300; walk_px_y = 340; walk_px_x = 380; walk_y_drift = 18; walk_x_drift = 14; walk_time = 570; refocus_time = 500; refocus_click_time = 200;

function initGlobals() pixel_scale = xyWindowSize[0] / 1720; -- Macro written with 1720 pixel wide window lsPrintln("pixel_scale " .. pixel_scale);

walk_px_y = math.floor(walk_px_y * pixel_scale); walk_px_x = math.floor(walk_px_x * pixel_scale); if (lsScreenX < 1280) then -- Have to click way off center in order to not move at high resoltuions walk_y_drift = math.floor(walk_y_drift * pixel_scale); walk_x_drift = math.floor(walk_x_drift * pixel_scale); else -- Very little drift at these resolutions, clicking dead center barely moves walk_y_drift = 1; walk_x_drift = 1; end end

-- The flax bed window -- T4, guilded?: window_w = 166; -- T4, guilded?: window_h = 116; window_w = 174; window_h = 100; refresh_down_y_offs = 4; refresh_up_y_offs = 0;

-- adjust if "plant all guild owned" option is enabled window_check_done_once = false; function checkWindowSize(x, y) if not window_check_done_once then srReadScreen(); window_check_done_once = true; local pos = srFindImageInRange("UseableBy.png", x-5, y-50, 150, 100) if pos then window_w = 166; window_h = 116; end end end

-- position to drag window to function pinnedPos(x, y) local ret = {}; ret[0] = xyWindowSize[0] - 25*(x-1) - (window_w - 5); ret[1] = (y-1)*14 + (window_h/2) + 2; lsPrintln("pinnedPos(" .. x .. "," .. y .. ")=" .. ret[0] .. "," .. ret[1]); return ret; end

function refreshPosUp(x, y) local ret = pinnedPos(x, y); ret[0] = ret[0] + (window_w - 15); ret[1] = ret[1] - (window_h/2 - 4); -- - (window_h - 66) + refresh_up_y_offs; -- 50 for flax; lsPrintln("refreshPosUp(" .. x .. "," .. y .. ")=" .. ret[0] .. "," .. ret[1]); return ret; end

function refreshPosDown(x, y) local ret = pinnedPos(x, y); ret[0] = ret[0] - 2; ret[1] = ret[1] + (window_h / 2) - refresh_down_y_offs; lsPrintln("refreshPosDown(" .. x .. "," .. y .. ")=" .. ret[0] .. "," .. ret[1]); return ret; end

function getCenterPos() local ret = {}; ret[0] = xyWindowSize[0] / 2 - walk_x_drift; ret[1] = xyWindowSize[1] / 2 + walk_y_drift; return ret; end

function setWaitSpot(x0, y0) setWaitSpot_x = x0; setWaitSpot_y = y0; setWaitSpot_px = srReadPixel(x0, y0); end

function waitForChange(timeout) if not timeout then timeout = 10000000; end local c=0; local timestart = lsGetTimer(); while srReadPixel(setWaitSpot_x, setWaitSpot_y) == setWaitSpot_px do lsSleep(1); c = c+1; if (lsShiftHeld() and lsControlHeld()) then error 'broke out of loop from Shift+Ctrl'; end if lsGetTimer() > timestart + timeout then lsPrintln('Timed out waiting.'); end end lsPrintln('Waited ' .. c .. 'ms for pixel to change.'); end

function drag(x0, y0, x1, y1) srSetMousePos(x0, y0); setWaitSpot(x1, y1); srMouseDown(x0, y0, 0); -- lsSleep(15); srSetMousePos(x1, y1); -- lsSleep(50); waitForChange(); srMouseUp(x0, y0, 0); -- lsSleep(50); end

function promptFlaxNumbers(is_plant) scale = 1.0;

local z = 0; local is_done = nil; local value = nil; -- Edit box and text display while not is_done do -- Put these everywhere to make sure we don't lock up with no easy way to escape! checkBreak("disallow pause");

lsPrint(10, 10, z, scale, scale, 0xFFFFFFff, "Choose passes and grid size");

-- lsEditBox needs a key to uniquely name this edit box -- let's just use the prompt! -- lsEditBox returns two different things (a state and a value) local y = 40; if is_plant or rip_out_when_done then lsPrint(5, y, z, scale, scale, 0xFFFFFFff, "Passes:"); is_done, num_loops = lsEditBox("passes", 110, y, z, 50, 30, scale, scale, 0x000000ff, 5); if not tonumber(num_loops) then is_done = nil; lsPrint(10, y+18, z+10, 0.7, 0.7, 0xFF2020ff, "MUST BE A NUMBER"); num_loops = 1; end else lsPrint(5, y, z, scale, scale, 0x808080ff, "Passes: 1"); num_loops = 1; end y = y + 32;

lsPrint(5, y, z, scale, scale, 0xFFFFFFff, "Grid size:"); is_done, grid_w = lsEditBox("grid", 110, y, z, 50, 30, scale, scale, 0x000000ff, grid_w); if not tonumber(grid_w) then is_done = nil; lsPrint(10, y+18, z+10, 0.7, 0.7, 0xFF2020ff, "MUST BE A NUMBER"); grid_w = 1; grid_h = 1; end grid_w = tonumber(grid_w); grid_h = grid_w; y = y + 32;

if not is_plant then lsPrint(5, y, z, scale, scale, 0xFFFFFFff, "Seeds per:"); is_done, seeds_per_pass = lsEditBox("seedsper", 110, y, z, 50, 30, scale, scale, 0x000000ff, 4); if not tonumber(seeds_per_pass) then is_done = nil; lsPrint(10, y+18, z+10, 0.7, 0.7, 0xFF2020ff, "MUST BE A NUMBER"); seeds_per_pass = 1; end y = y + 32; end

fast_refocus = lsCheckBox(10, y, z+10, 0xFFFFFFff, "Fast refocus", fast_refocus); y = y + 32;

if lsButtonText(170, y-32, z, 100, 0xFFFFFFff, "OK") then is_done = 1; end

if is_plant then lsPrintWrapped(10, y, z+10, lsScreenX - 20, 0.7, 0.7, 0xD0D0D0ff, "This will plant and harvest a " .. grid_w .. "x" .. grid_w .. " grid of Flax " .. num_loops .. " times, requiring " .. (grid_w * grid_w * num_loops) .. " seeds, doing " .. (grid_w*grid_w*num_loops) .. " flax harvests."); else rip_out_when_done = lsCheckBox(10, y, z+10, 0xFFFFFFff, "Rip out when done", rip_out_when_done); y = y + 25; lsPrintWrapped(10, y, z+10, lsScreenX - 20, 0.7, 0.7, 0xD0D0D0ff, "This will plant a " .. grid_w .. "x" .. grid_w .. " grid of Flax and harvest it " .. seeds_per_pass .. " times, requiring " .. (grid_w * grid_w) .. " seeds, and repeat this " .. num_loops .. " times, yielding " .. (grid_w * grid_w * num_loops * seeds_per_pass) .. " seeds."); end

if fast_refocus then lsPrintWrapped(10, y+80, z+10, lsScreenX - 20, 0.7, 0.7, 0xD0D0D0ff, "Fast Refocus uses the original refocusing method which may work more reliably on computers with very stuttery framerates. Otherwise, a simpler refocusing method is used which is reported to work better on most systems."); end

if is_done and (not num_loops or not grid_w) then error 'Canceled'; end

if lsButtonText(lsScreenX - 110, lsScreenY - 30, z, 100, 0xFFFFFFff, "End script") then error "Clicked End Script button"; end

lsDoFrame(); lsSleep(10); -- Sleep just so we don't eat up all the CPU for no reason end end

function refocusWindows() if fast_refocus then local first = true; for y=grid_h, 1, -1 do local first_on_line = true; for x=grid_w, 1, -1 do if not first then local rp = refreshPosUp(x, y); if first_on_line then local waitpos = refreshPosUp(x, y); setWaitSpot(waitpos[0]+6, waitpos[1]+20); --srSetMousePos(waitpos[0]+6, waitpos[1]+20); else local waitpos = pinnedPos(x, y); setWaitSpot(waitpos[0]-4, waitpos[1]); end srClickMouseNoMove(rp[0], rp[1], 0); waitForChange(); end first = false; first_on_line = false; end end else for y=grid_h, 1, -1 do for x=grid_w, 1, -1 do local rp = refreshPosUp(x, y); srClickMouseNoMove(rp[0], rp[1], 0); lsSleep(refocus_click_time); end end end lsSleep(refocus_time); -- Wait for last window to bring to the foreground before clicking again end

function fillWater() srReadScreen(); statusScreen("Filling jugs with water.."); local xyWater = srFindImage(imgWater); while not xyWater do statusScreen("Not in range of water, move to water."); srReadScreen(); xyWater = srFindImage(imgWater); checkBreak(); end srClickMouseNoMove(xyWater[0], xyWater[1]); lsSleep(200); srReadScreen(); local xyMax = srFindImage(imgMax); while not xyMax do srReadScreen(); xyMax = srFindImage(imgMax); checkBreak(); end srClickMouseNoMove(xyMax[0], xyMax[1]); lsSleep(4000); end

xyCenterScreen = getCenterPos();

function movetoWater(hasMoved) if hasMoved == 0 then srClickMouseNoMove(xyCenterScreen[0]+340, xyCenterScreen[1],0); lsSleep(500); else srClickMouseNoMove(xyCenterScreen[0]-300, xyCenterScreen[1],0); lsSleep(500); end end