The Wiki for Tale 6 is in read-only mode and is available for archival and reference purposes only. Please visit the current Tale 11 Wiki in the meantime.

If you have any issues with this Wiki, please post in #wiki-editing on Discord or contact Brad in-game.

Difference between revisions of "Carpentry Blade"

From ATITD6
Jump to navigationJump to search
m
Line 2: Line 2:
  
  
'''Carpentry blades''' are metal blades installed in a [[Carpentry Shop]] to enable the cutting of [[boards]] and the making of special tools. Blades are made on an [[Anvil]], and like all products made with [[Blacksmithing]], each has its own quality rating from 0 to 9999.  
+
'''Carpentry blades''' are metal blades installed in a [[Carpentry Shop]] to enable the cutting of [[boards]] and the making of a [[sledgehammer]]. Blades are made on an [[Anvil]], and like all products made with [[Blacksmithing]], each has its own quality rating from 0 to 9999.  
  
 
A carpentry blade requires 1 metal to make; this metal can be [[iron]], [[copper]], [[brass]], or [[steel]]. Carpentry blades are probably the easiest products to shape on an anvil, and are certainly the cheapest.  
 
A carpentry blade requires 1 metal to make; this metal can be [[iron]], [[copper]], [[brass]], or [[steel]]. Carpentry blades are probably the easiest products to shape on an anvil, and are certainly the cheapest.  
  
 
Carpentry blades eventually wear out as they are used to cut boards. Higher quality blades will last longer. A blade must be of quality 3000 or higher to be used in a Carpentry Shop.  
 
Carpentry blades eventually wear out as they are used to cut boards. Higher quality blades will last longer. A blade must be of quality 3000 or higher to be used in a Carpentry Shop.  
 +
 +
== Smithing a Carpentry Blade ==
  
 
The classic reference for making a 7k+ carp blade in 23 hits is shown at the [http://atitd.org/wiki/tale3/Guilds/The_Lollipop_Guild/CarpGuide The Lollipop Guild's CarpGuide] page.  
 
The classic reference for making a 7k+ carp blade in 23 hits is shown at the [http://atitd.org/wiki/tale3/Guilds/The_Lollipop_Guild/CarpGuide The Lollipop Guild's CarpGuide] page.  
  
 
An alternate, animated guide is available from the Tale IV [http://www.atitd.org/wiki/tale4/Guilds/Coastal_Plains/Carpentry Coastal Plains] Guild.
 
An alternate, animated guide is available from the Tale IV [http://www.atitd.org/wiki/tale4/Guilds/Coastal_Plains/Carpentry Coastal Plains] Guild.
 +
 +
== Quality and Durability ==
  
 
Below is some research on exactly how long certain quality blades lasted in use. These prove that boards per blade has a random element (the first two blades were exactly 3000q and planed significantly different numbers of boards). In general, better quality blades plane more boards. In a narrow range there will be anomolies does to the random element in the function determining how many boards a blade will last for. --Narafeti  
 
Below is some research on exactly how long certain quality blades lasted in use. These prove that boards per blade has a random element (the first two blades were exactly 3000q and planed significantly different numbers of boards). In general, better quality blades plane more boards. In a narrow range there will be anomolies does to the random element in the function determining how many boards a blade will last for. --Narafeti  

Revision as of 22:10, 16 January 2012

CarpentryBlade.png
Bulk 1
Weight 1


Carpentry blades are metal blades installed in a Carpentry Shop to enable the cutting of boards and the making of a sledgehammer. Blades are made on an Anvil, and like all products made with Blacksmithing, each has its own quality rating from 0 to 9999.

A carpentry blade requires 1 metal to make; this metal can be iron, copper, brass, or steel. Carpentry blades are probably the easiest products to shape on an anvil, and are certainly the cheapest.

Carpentry blades eventually wear out as they are used to cut boards. Higher quality blades will last longer. A blade must be of quality 3000 or higher to be used in a Carpentry Shop.

Smithing a Carpentry Blade

The classic reference for making a 7k+ carp blade in 23 hits is shown at the The Lollipop Guild's CarpGuide page.

An alternate, animated guide is available from the Tale IV Coastal Plains Guild.

Quality and Durability

Below is some research on exactly how long certain quality blades lasted in use. These prove that boards per blade has a random element (the first two blades were exactly 3000q and planed significantly different numbers of boards). In general, better quality blades plane more boards. In a narrow range there will be anomolies does to the random element in the function determining how many boards a blade will last for. --Narafeti

Quality - Boards

  • 3000(1) - 131
  • 3000(2) - 114
  • 3509 - 215
  • 3785 - 237
  • 4731 - 306
  • 5556 - 395
  • 6000 - 444
  • 6502 - 516
  • 6555 - 518
  • 7000 - 555
  • 7168 - 574
  • 7353 - 619
  • 7500 - 611
  • 7609 - 721


Uses